Having the right equipment can make your job easier and more efficient. This is especially true for large concrete projects that need to meet strict floor flatness tolerances, which are often called FL values. A laser screed for concrete is a great option for contractors that need to achieve high FL values and meet production schedules.
A laser-guided concrete screed machine is used to level concrete in large floor pours by determining the correct elevation height and vibrating the concrete to lessen air pockets, delivering a smoother surface. These machines are available in a range of head sizes, including telescopic laser-guided boom models.
However, these machines are costly and require a skilled operator. Therefore, many contractors choose to rent a laser screed instead of purchasing it. There are several different leasing methods for this type of equipment, such as long-term rental and hourly rental. Each leasing method has its own advantages and disadvantages. Choosing the right option for your needs will help you save money and time.
Screed, also known as floor levelling screed or floor topping, is a cement layer that forms the substrate for your flooring. It is often placed under floor insulation, electrical and sanitary pipes. Screed thickness can vary depending on the type of flooring being installed. A thinner screed is easier to level and can be walked on immediately after it has been laid.
A thicker screed is more resistant to curling and lifting. It can also withstand greater variation in the structural concreteâs finishing levels. However, it is important to note that too much thickness will require the screed to be sanded down and can result in excessive surface bleed water.
Ideally, the strength requirement should be derived from anticipated worst-case service conditions. In addition, the design should stipulate the location of contraction/control joints. In addition, the use of reinforcement can be specified to absorb tensile stresses associated with shrinkage and reduce shrinkage crack size. The reinforcement may be in the form of fine metal mesh or fibres (typically polypropylene). Ready-mixed sand and cement screeds provide quality assurance over mixed on-site screeds.
Screed is a layer of concrete that is laid over a concrete base. It protects the concrete and makes a stable surface for laying final floor layers. It can also be used as an insulator for floors with underfloor heating. There are three main types of screed: bonded, unbonded, and floating.
Bonded screed is slurry bonded to the substrate with a bonding agent. It is ideal for thinner applications where heavy loading is anticipated. The thickness of a bonded screed can range from 15mm to 50mm, although 25-40mm is the optimum.
Unbonded screed is not directly connected to the substrate, but is placed on top of a polythene or damp proof membrane. It is normally thicker than a bonded screed and can be as much as 100mm or more if curling must be avoided. This type of screed can be used in a variety of settings, including commercial buildings and hospitals. It can also be poured over insulation to increase the efficiency of underfloor heating systems.
Screed is often used to level out a concrete sub base, but it also offers a range of other benefits. For example, it can be used to cover insulation and underfloor heating pipes, offering a thermally efficient solution. It can also be used to cover a concrete floor, which will protect it from damage during construction.
The thickness of a screed is crucial for ensuring its strength. It is important to identify the worst-case service conditions and work backwards to calculate the screed thickness required. This will ensure that the screed will be strong enough to withstand all anticipated use cases and provide a satisfactory installation.
In unbonded or floating screeds, the specified design thickness should be a minimum of 50mm to allow for variations in finished levels. A bonded wearing screed should be a minimum of 100mm, but consideration should be given to making it 150mm or more. This will help to minimise the risk of curling, which can be a serious problem with unbonded and floating screeds.
A few things to look for in a concrete contractor in Huntington West Virginia are previous work, licenses, and certifications. Yoder Laser Concrete has years of work experience, history, licenses, and certifications. When looking for a concrete contractor, youâll want someone who does a quality job, does it right the first time, and delivers the results you need. Yoder Laser Concrete is your contractor for meeting all these expectations.
If youâre looking for a concrete contractor in Huntington West Virginia, there are several options to choose from, but choosing the correct one is the most important thing. Yoder Laser Concrete, is an Amish owned concrete contractor serving the Huntington West Virginia area. This company handles all aspects of concrete, foundation footer construction, laser screed concrete jobs, warehouse floors, large parking lots, and more! Their professional team has years of experience in these areas, and they can help you determine the best option for your project.
Remember, concrete is durable and can be shaped and colored in many ways. Commercial concrete foundations, concrete floors, and concrete parking areas deal with heavier loads than residential. A concrete contractor in Huntington West Virginia such as Yoder Laser Concrete can help you make the best choice for your project. They will take care of all the details and perform quality work that is sure to last!
Some Points to Consider
While concrete is more expensive than asphalt, it has many benefits. While concrete does not require as much maintenance as asphalt, it will last a lot longer and have less chance of tearing up. In addition to roads, concrete parking lots can also provide a beautiful curb appeal for your business. Another advantage of concrete is its durability and resiliency to extreme temperatures. Youâll spend less money on repairs and have a lower risk of business down time with quality commercial concrete.
If youâre in need of a concrete contractor in Huntington West Virginia, youâll be pleased to know that Yoder Laser Concrete offers laser screed concrete services. Using a laser screed on your concrete project allows for the best precision and quality as well as the ability to complete large projects
With a cement laser screed machine, you can get the best paving results. The laser technology used in the machine makes it ideal for workshops, food materials warehouses, and medication factories. The compact design and comfortable operator seat make it an excellent choice for any business or household. You can cover up to 2400 m in just 8 hours. The unitâs automatic controls also help you achieve a level finish with an extremely high degree of precision.
The lasers used in a laser screed system are placed in the concrete mix. They are installed at the head and receive a signal from a transmitter multiple times per second. The system is capable of controlling a distance of over 1000 feet. A single transmitter enables the unit to work to much higher tolerances, making it an excellent choice for commercial and residential projects. This machine is a great investment for any home or business.
A laser screed also allows you to control elevation. The machine has two receivers mounted on the head and sends signals from the transmitter several times per second. A single laser transmitter can control up to 1000 ft, allowing you to achieve optimum levels all over your floor area. Moreover, a single transmitter can cover a wide area, giving you the option to have a wider floor surface. With all the advantages, it is a smart choice for your business.
Compared with a mechanical screed, a laser screed is more efficient and easier to use. The device has electronic-controlling features and uses strong vibrators. This high-frequency vibration enables it to work quickly and easily. This makes it possible to get a smoother finish than ever, and allows you to get a better finished level with less work. The resulting floor will look perfect and even for years to come.
In addition to the advanced features, the concrete laser screed is much easier to use. A high-speed computer-controlled programmable machine allows you to increase productivity without sacrificing safety. Its high-precision precision can guarantee flatness and reduce construction joint spacing. Some of the models even have dry shake capabilities. Youâll never have to worry about the level of your finished floor. Youâll be assured of quality and consistency in your construction projects.
A laser screed can be a great choice for many types of projects. The process of applying a concrete laser screed can be extremely fast and easy to complete. Once installed, it will create a smooth, flat floor that will last for years. Unlike traditional screeding methods, a laser screed can save you a lot of time. By adjusting the height and depth of the concrete, the machine will achieve the desired level of perfection.
Article Written By: Kristen Mooney
Yoder Laser Concrete, located in the heart of Amish country in Millersburg, Ohio offers customers a chance to get affordable concrete that is not only durable, but also decorative and appealing. The company was originally founded more than a decade ago by Dan Yoder, an Amish man who makes his home in Millersburg, Ohio. Today, Yoder Laser Concrete consists of approximately 30 employees and services customers throughout Ohio and its surrounding states. General Manager, John Clark, says the company handles a myriad of projects including, industrial, agricultural, commercial and residential. This means theyâre capable of creating massive industrial floors and pads while also specializing in residential driveways, patios, basements, pools and more.
Yoder Laser Concrete, the Alpha and Omega of concrete placing and finishing, we can help you land more projects even with the state of the economy. You prep, we place, finish, seal and saw-cut starting at $0.35 cents per sq. ft, add $0.20 cents per sq. ft for us to prep your slab. For projects that require materials and labor included, we plot our own prints, and we can give you a complete concrete package. We cover Ohio and surrounding states.
âIt takes an awareness of the new and innovative concepts that are being utilized in the concrete industry everyday to improve the procedures of consolidating and finishing concrete,â Clark says. Clark added that he spends much of his time researching the latest advances and techniques in the concrete industry so he can pass along that information to his employees and expand the services of the company. One of these advances is the Somero S-100 Laser Screed, which is used to improve the flatness and levelness of a slab of concrete. This high-tech machine allows Yoder Laser Concrete to meet the needs of larger commercial and warehouse projects with the capability of pouring up to 25,000 sq. feet per day. Even further, it has successfully completed concrete projects in the past for businesses like Wal Mart, CVS Pharmacies, and Walgreenâs with precise flourish, Clark says. For folks looking to add a flourish of their own, Yoder Laser Concrete also offers both patterned and colored cement that give any home a signature style. âItâs not your standard, run of the mill concrete,â he said. âItâs artistic and exquisite.â
Customers can even request that their concrete look like brick or stone, which heightens the appearance of not only driveways, but also pool decks and patios. Clark said that while some people prefer to have neutral-colored concrete, others elect to choose colors that match their house paint or simply look striking. But what really ensures customer satisfaction even above a beautiful exterior, is the dedication of Yoder Laser Concrete has to its customers. Clark says he and his employees always strive to make sure customers are content with their concrete project before leaving the job site.
âWe exhaust great efforts to ensure that each project meets the customerâs needs and demands through knowledge and communication to achieve the most desired happiness,â he said. Clark added that a large source of the companyâs commitment to integrity lies with Mr. Yoderâs Amish background. Yoder instilled his values of hard work and service into his original employees and those values have remained steady throughout the companyâs history. Itâs this combination of ethics and modern concrete services that makes Yoder Laser Concrete the ideal company for any residential or industrial project. âWe get there early and work hard all day,â Clark said. âItâs old-world ethics, combined with new-world technology.â
Clark emphasized that the employees at Yoder Laser Concrete are experienced and seasoned workers. Between them, they have more than 100 combined years of experience in the field. This means a greater mastery of what Clark calls the science of concrete. âIt starts from the time you schedule the project and track the weather until you step out of the truck on the project and make any adjustments to the concrete mix to compensate for deviations that the weather may provide. Itâs also not something you can leave until winter.â Clark said fall is the perfect time to complete your concrete projects because everything will be solidified and polished by the time the snow starts to fly in a couple of months.
Clark added that as people are lining up the last of their projects, they could actually save thousands of dollars by choosing to use concrete instead of asphalt. As the cost of asphalt has recently seen a sharp increase, which makes Yoder Laser Concreteâs prices even more competitive. To take advantage of these great prices and the hard working nature of Yoderâs employees, you can contact Yoder Laser Concrete at 330-674-3365 or visit the company at 163 East Adams St in Millersburg between 7am and 5:30pm Monday through Friday. Customers are also encouraged to check out Yoder Laser Concrete on the web at www.yoderlaserconcrete.com.
When quality, time and money are important to you, call us at (330)231-3587.
The Somero S-240 Laser Screed features a 12-foot wide screeding head mounted on a powerful 20-foot telescopic boom. This results in 240 square feet of consolidated, laser-level concrete in less than one minute. Add to this the fact that you can take advantage of wide placement when using a Laser Screed, eliminating most formwork, and true fast-track production becomes a reality.
Improved Quality
“The Somero Laser Screed is essential for meeting the demands for flatter floors in today’s industrial facilities,” says Scott Niemitalo. Ace/Avant even uses the S-240 Laser Screed on it’s superflat floor projects, helping them to achieve incredible flatness and levelness numbers.
Concrete Paving
The S-240 Laser Screed can easily place concrete over contoured surfaces when you add the Somero 3-D Profiler System. Now you can expand your Services to include paving parking lots, roadways, and runways. Concrete paving and white topping is a growing, multi-billion dollar market.
S-240 Specifications
| Overall Width | 7′-8″ Outside of Tires (2.34 m) 14′-1″ at Screed Head (4.29 m) |
| Overall Length | 18′-3″ Boom In (5.56 m) 36′-1″ Boom Out (11.0 m) 28′-5″ Transport (8.66 m) |
| Overall Height | 8′-3″ (2.51 m) |
| Weight (nominal) | 15,100 lbs. (6850 kg) |
| Boom Reach | 20 ft. (6.1 m) |
| Screed Width | 12 ft. (3.66 m) |
| Screed Area Per Pass | 240 sq. ft. (22.3 m2) |
| Fuel Capacity | 27 gallons (102 l) |
| Hydraulic Oil Capacity | 27 gallons (102 l) |
| Upper Frame Rotation | 360 degrees |
| Vehicle Stabilizers | 4 hydraulically-operated stabilizer pads |
| Drive Train | Hydraulic-powered four wheel drive |
| Axles â Two | Drive Steer Type |
| Operating Modes | 2 Wheel, 4 Wheel, Crab Steer |
| Tires/Wheels | 35″ 12 ply / 16″ rims |
| Maximum Speed | 3.6 MPH (5.8 kpH) |
| Engine Type | 4 Cyl., 4 stroke, direct-injection, liquid cooled diesel 199 cu. in. (3.26 l) |
| Horse Power | 65 HP @ 2600 rpm (48.5 kW) |
| Miscellaneous Features | 12 volt, key on & off, cold start aid, hand-actuated throttle with electric shutoff |
| Laser Type | 2 independently mounted laser receivers with on-board computer control panel. Continuous elevation monitoring at a rate of 10 times per second. |
| Screed Type | Hydraulic powered laser controlled screeding head mounted on a telescopic boom. Self-leveling screed head consists of a plow that removes excess concrete, an auger that cuts concrete to grade, and a vibrator that consolidates material at 3000 VPM. |
Contact us today to discuss your concrete needs and get a free estimate. Whether you have a commercial, industrial, or agricultural project, we are here to help you achieve the best results. With our expertise and advanced technology, we can start your project in as little as three weeks.
